Services

Acusafe LED Light Engine

The Acusafe solid state light engine has been designed to fit inside a 50mm safety rail upright in the middle of a 6m section. Dimensions are 148mm long x 50mm Dia

• Six 3mm fibre optics at a maximum length of 3m are illuminated from the light engine with an adjustable light output of 50 - 280 Lux at termination.
• The light engine has a maximum energy consumption of 7w at 12v AC or DC. All colours are available.
• FutureFlux heat transfer system has been utilised to enable high rate heat transfer to the outside of module and in turn to the upright as the heat sink.
• The solid state light engine has its own proprietary IC that enables voltage regulation, current regulation and intelligent thermal control to ensure overheating cannot occur.
• The IC also interrogates the light engine continuously and will give a contact closure "default" if it needs replacing.
• Should power be lost to the light engine the default contact closure will operate.
• Our testing indicates a specified life of over 53,000 hours. This does not mean the light engine will fail but the light degeneration would reach LM80 level of 80% of its original Lux. This would flag a maintenance replacement initiative. This equates to 12 hours per day times 12 Years. Or continuous use at 24 hours per day times 6 Years.
• The light engine body is manufactured from high-density aluminium that will withstand high temperatures in the case of fire, and any compression whilst in situ with the rail.
• All electronics are marine grade and are in situ with the body. The body cannot be dismantled once completed as all components are in situ with Futureflux heat transfer medium.
• The components and finished light engine meet the following standards. UL, DLC, FCC, CTick, RCM, TUV, PSC, CE, MEPS AU,
• Independent testing is currently underway - Futurebrite Certification: RCM 5553
• The KAG Safety Rail is also available with encased fibre-optic LED lighting to provide added safety underground and at night. Services such as water, electrical, air/gas and data can be safely concealed inside the rail.

Benefits

• Light engine is small and fits inside railing upright
• Only 7w full energy consumption - low voltage - safe.
• No fan or moving parts - reliable solid state.
• Completely waterproof and submersible.
• Protected by hardened aluminium shell and then placed inside railing.
• Proven components from leading manufacturers - reliability
• Alarm output for testing and maintenance
• Data output if required reading any component.
• Long life over 53,000 hours
• Can be used for rail and passageway lighting
• Illuminated arrows showing exit in case of fire
• Cost effective only 1 light engine per 6m.
• Can be configured with changing colours for safe or danger